Navigation using nondirectional radio beacons (NDBs) is the oldest form of electronic navigation still in regular use. In the early days of aviation, the process of navigating between these beacons, called radio direction finding, required positioning the airplane’s antenna to receive and interpret bearing information with the ADF.
ADF equipment in the aircraft permits L/MF signals to be received through the antenna, relayed to the ADF receiver where they are processed, and then sent to the ADF bearing indicator.
Moveable Card ADF.
Fixed Card ADF
MH + RB = MB
Intercepting a specific bearing to track to or from an NDB is accomplished by a method similar to that used in VOR navigation. Use the ADF formula to help you with this procedure.
MH + RB = MB
Normally, the best way to fly to or from a station is in a straight line, which requires tracking if any crosswind is present. The tracking procedure for an ADF is similar to VOR tracking.
Homing
A procedure during which you always keep the nose of the aircraft pointing directly to the station is called homing to the station. To fly to an NDB using the homing procedure simply turn to position the head of the ADF needle on the aircraft’s nose
ADF indicator does not have an OFF flag, it is possible to inadvertently refer to the signal after it is no longer reliable.
One way to make sure you have a usable signal is to leave the identifier turned up to an audible level whenever you use the ADF for navigation.
Also, some limitations are:
Needle tends to point to the source of the lightning flashes rather than the tuned NDB.
By a buildup of static electricity on an aircraft flying in rain, snow, or clouds.
Can occur when mountains reflect the radio waves and cause erroneous bearing indications.
Radio waves speed up over water, causing the wave front to bend away from its normal path and pull it towards the coast.