Rotational Motion

M. Rocha

Physics 10

Rotation vs. Revolution

Rotation: when an object turns about an internal axis—that is, an axis located within the body of the object

Revolution: when an object turns about an external axis.

Rotation vs. Revolution

Angular Velocity

\mathrm{Angular \ Velocity} = \frac{\mathrm{Number \ of \ Rotations/Revolutions} }{ \mathrm{Time \ interval}}

\mathrm{Angular \ Velocity} = \omega = \frac{\mathrm{radians}}{t}

RPMs (Revolutions/Rotations per minute) is a commonly used measure of angular velocity

In Physics we like to use "radians per unit time" as a measure of angular velocity

2 \pi \ \mathrm{radians} = \mathrm{1 \ full \ circle }

L = \theta \times r

Small angle approximation

Arc Length =

r \sin \theta \approx r \ \theta

\approx

r = Hypotenuse

Adjacent

Arc Length and The Small Angle Approximation

Circle Trigonometry

\pi = 180^{\circ}

\pi/2 = 90 ^{\circ}

3\pi/2 = 270^{\circ}

2\pi = 360^{\circ}

\pi =\frac{\mathrm{Circunference}}{\mathrm{Diameter}} = \frac{\mathrm{Circunference}}{2 \times \mathrm{Radius}}

Checkpoint 1

\omega = \frac{\mathrm{radians}}{t}

If a race car travels around a circular track with an angular velocity of , how long does it takes to complete a full revolution.

\omega = \pi \ \mathrm{radians/min}

2 minutes

2 \pi \ \mathrm{radians} = \mathrm{1 \ full \ circle }

Tangential Velocity

Tangential velocity is the linear velocity of something moving along a circular path

v_\mathrm{tangential} = \omega \times r

If angular velocity is given in radians, then

v_\mathrm{tangential} = \frac{\mathrm{arc \ length}}{\mathrm{time}}

= r \ \theta

\theta \mathrm{\ in \ radians}

Checkpoint 2

\omega = \frac{\mathrm{radians}}{t},

If car 1 and car 2 below travel on a circular track with the same angular velocity, which one has a larger tangential velocity and by how much?

Car 1 travels 2x faster

v_t = \omega \times r

car 2

car 1

Tangential Velocity

All parts of the turntable rotate at the same angular velocity

A point farther away from the center travels a longer path in the same time and therefore has a greater tangential velocity

Rotational Inertia

Inertia: The tendency of an object to resist changes in velocity. An object at rest tends to stay at rest and an object in motion tends to remain moving in a straight line.

Rotational Inertia: The tendency of a rotating object to resist changes in angular velocity. An object rotating about an axis tends to remain rotating about the same axis unless interfered with by some external force.

Rotational Inertia

Rotational Inertia depends on the amount of mass and the distance of mass from the axis of rotation

Rotational Inertia

The longest the pole the more balance it provides

Rotational Inertia depends on the amount of mass and the distance of mass from the axis of rotation

Rotational Inertia

Rotational Inertia depends on the amount of mass and the distance of mass from the axis of rotation

Checkpoint 3

For an ice skater rotating, which body positioning has the greatest rotational inertia

d) has the most amount of mass distant to the axis of rotation, so it has the highest rotational intertia

Consider balancing a hammer upright on the tip of your finger. The end is heavier than the handle. Which way is it easier to balance? a) with the head at the top, or b) the other way around.

a) With the head at the top.

That way the rotational inertia is the greatest so it will be harder for it to rotate about your finger.

Torque

You know that a longer lever arm makes it easier to rotate objects that require a lot of rotational force

Torque

Torque is rotational force. It is proportional to the applied tangential force and the distance to the axis of rotation.

\mathrm{Torque} = \mathrm{Force} \times \mathrm{lever \ arm \ length} = F \times r

Angular Acceleration

A force causes a change in velocity, i.e. acceleration (Newton's 2nd law)

\mathrm{Angular \ Acceleration} = \frac{\mathrm{Torque}}{\mathrm{Rotational \ Inertia}} = \frac{ F \times r}{I}

A torque causes a change in angular velocity, i.e. angular acceleration (Newton's 2nd law in rotational motion)

a = \frac{F}{m}

Balanced Torques

\sum{\mathrm{Torques}} = 0 \Rightarrow \mathrm{No \ rotation}

(F \times r)_\mathrm{counter \ clockwise} - (F \times r)_\mathrm{clockwise} = 0

Checkpoint 4

If the system below is balanced (not rotating), what is the weight of the block hung at the 10-cm mark?

15 N

Angular Momentum

Angular Momentum is rotational inertia in rotational motion

\mathrm{Momentum} = \mathrm{mass} \times \mathrm{velocity}

p = mv

Momentum is inertia in motion

\mathrm{Angular \ Momentum} = \mathrm{rotational \ inertia} \times \mathrm{rotational \ velocity}

\mathrm{Angular \ Momentum} = I \omega

Angular Momentum

Angular Momentum is rotational inertia in rotational motion

\mathrm{Angular \ Momentum} = \mathrm{rotational \ inertia} \times \mathrm{rotational \ velocity}

\mathrm{Angular \ Momentum} = I \omega

For a point mass

I \omega = m r^2 \omega = m r^2 \frac{v}{r} = m v r

I = m r^2 ,

\omega = \frac{v}{r}

Conservation of Angular Momentum

If no external net torque acts on a rotating system, the angular momentum of that system remains constant.

Conservation of Angular Momentum

If no external net torque acts on a rotating system, the angular momentum of that system remains constant.

Red Bull Cliff Diving 2015

Conservation of Angular Momentum

If no external net torque acts on a rotating system, the angular momentum of that system remains constant.

Figure Skating's Quintuple Jump Video

Centripetal Force

Centripetal force is the force that keeps objects in circular motion

Centripetal Force

Centripetal force always points to the center and its magnitude is

F_{c} = \frac{mv_{t}^2}{r}

F_{c}

Centripetal Force

Centripetal force holds a car in a curved path.

a) For the car to go around a curve, there must be sufficient friction to provide the required centripetal force.

b) If the force of friction is not great enough, skidding occurs.

Checkpoint 5

F_{c} = \frac{mv_{t}^2}{r}

A car with mass m = 1000 kg takes a turn with a radius of curvature of r = 30 m at a speed of v = 30 m/s (about 65 miles/h) , if the force of friction between the tires and the road is 7000 N, would it make the turn?

F_{c} = \frac{mv^2}{r} = \frac{1000kg \times (30 m/s)^2}{30m} = 30000 N

No, it will skid

Centripetal Force vs. Centrifugal Force

The only force that is exerted on the whirling can (neglecting gravity) is directed toward the center of circular motion. This is a centripetal force. No outward force acts on the can

Centripetal Force v.s. Centrifugal Force

However from the reference frame of the lady bug it feels like there is a centrifugal force away from the center, and the centripetal force is just a support force

Centrifugal Force

Centripetal Force v.s. Centrifugal Force

The apparent centrifugal inside a rotating reference frame feels just like gravity, we can call this simulated gravity

a) As seen from the outside, the only force exerted on the man is by the floor

b) As seen from the inside, there is a fictitious centrifugal force that simulates gravity

Simulated Gravity

The End

Center of Mass

The center of mass is the average position of all the mass that makes up an object

Center of Mass

Objects rotate about their center of mass