U1
CX-07 · REV B
CIRCUIT SYSTEMS · PLATFORM BRIEFING
The board, the firmware and the fleet behind every sensor we ship.
Presented by {{author}}
U2
01
Half the power, twice the radio range
02
Safe updates over the air
03
Forty thousand nodes in the field
04
The roadmap for the next two years
PART 01
That one rule shaped the new board, the radio schedule and the way we ship firmware.
J1 · EDGE CONNECTOR
{{#}} / {{total}}
Our old board was designed for a lab bench, not a bridge. It drew too much power while asleep, its radio woke on a timer whether there was news or not, and a battery swap meant a crew and a lift. The CX-07 starts from the other end: sleep is the default, and every milliwatt earns its place.
40K
NODES IN THE FIELD
99.7%
READINGS DELIVERED
12M
READINGS A DAY
Source: Circuit Fleet Telemetry, past twelve months
BATTERY LIFE · CX-07
9.4
years on two AA cells, reading once a minute. The old board lasted fourteen months.
J2
The main loop reads, decides and goes straight back to sleep. Most of the day is spent on the last line.
void loop() {
Reading r = sensor.read();
if (r.delta() > THRESHOLD) {
radio.send(r);
}
rtc.sleepFor(60 * SECONDS);
}TP1
YEAR 1 · PROTOTYPE
Twelve hand-built boards on one footbridge
TP2
YEAR 2 · PILOT
Four hundred nodes across three water networks
TP3
YEAR 3 · FLEET
Forty thousand nodes, updated over the air
TP4
NEXT · CX-08
Solar charging and a sealed five-year case
Nodes report straight to your own gateway, with no cloud in the loop.
M1
Readings stay on site, while summaries and alerts go to the cloud.
M2
Every reading lands in Circuit Cloud, ready for your dashboards.
M3
FIELD NOTE · NODE 0412
Sixty-two nodes track strain and vibration on a rail viaduct. None has needed a battery swap since install.
One accurate measurement is worth a thousand expert opinions.
Grace Hopper
Computer scientist and rear admiral
J3
platform@circuit.example
+1 555 0127 · circuit.example