The lesson teaches how to design a comparison. It does not report a fabric or printer experiment.
A number without an axis or unit can be ambiguous. In real work, document conditions rather than implying they were controlled.
6.30 in converts back to 160.02 mm. The 0.02 mm difference is a rounding artefact, not a reported material change.
The denominator changes with the reference state. Opposite directions are not generally equal-magnitude percentages.
The first pair admits one mathematical multiplier 100/99. The second pair needs investigation; correcting its width uniformly would also change its already-matching height.
Multiply the retained side ratios: 0.98 x 0.95 = 0.931. Area does not tell you which direction changed more.
A complete record explains what was compared. Arithmetic alone cannot establish garment fit, printer accuracy or fabric performance.