How To Put Out A Joint And Save It For Later

Learning how to put out a joint and save it for later is an essential skill for all cannaenthusiasts. In fact, it’s right up there with the likes of packing a bowl, using a grinder, and cleaning a dab rig.

 

But, how, exactly, should you extinguish your joints for best effect? And how can you save the leftovers for later?

 

In this article, the all-things-cannabis experts at Honest Marijuana answer those questions and walk you step-by-step through the process of learning how to put out a joint.

 

How To Put Out A Joint

 

1) Leaving

The easiest way to learn how to put out a joint is just to leave it sitting in an ashtray.

 

Before you say, “Great!” and click away, this isn’t the absolute best way to extinguish your J because the bud inside will continue to burn just a little bit. It won’t burn a lot because there won’t be enough airflow to really ignite, but it will still smolder before going out completely.

 

Try this method to see if it works (and how you feel about it). Just be sure to ALWAYS leave the smoldering joint on or in an inflammable container like an ashtray, a metal can, a plate, or a glass cup.

 

2) Blowing

This is one of our favorite ways of learning how to put out a joint for the simple reason that it’s so completely counterintuitive. You wouldn’t think that it’d work, but it does!

 

Here’s how to do it: Blow into the joint for 10 seconds. That’s it!

 

The air blowing out the burning end of the joint isolates the cherry from the fuel (the ground plant matter), makes it burn faster, and, basically, causes the tip to consume itself. Check out the best grow lights canada online.

 

3) Stubbing

Stubbing is, perhaps, the most familiar way of learning how to put out a joint.

It’s similar to the technique employed by cigarette smokers: press the tip of the joint against a flat, hard surface.

The only difference is that you should be gentler with a joint because the paper is thinner and more liable to break. If you stub too hard, you’ll squash the skunk stick and ruin its shape.

4) Flicking

The goal of flicking is to physically separate the burning cherry from the rest of the joint. Without the burning plant matter, the J will go out, and you can store it for later.

To flick correctly, hold the joint gently in one hand and flick the tip toward the ashtray with the bottom of your lighter, a finger on the opposite hand (try using your fingernail), or some other hard object.

Get the best cbd death bubba, shrooms online blue meanies mushrooms and buy shatter online canada.

5) Grazing

In terms of how to put out a joint, grazing is similar to stubbing, but with a lot less force.

To graze your joint out, position it horizontally and then gently rub the burning cherry (left to right or up and down) against the walls of the ashtray.

Quality brands for your growing needs sunblaster grow light and sunblaster t5.

Doing this will cause the burning plant matter to fall away, extinguish the joint, and allow you to save it for later.

6) Cutting

A surefire way to extinguish your burning Js so you can save them for later is to cut the cherry off the tip with a pair of sharp scissors or a knife.

You can either hold the joint in one hand and snip or cut with the other hand. Or, you can place the joint on a plate or ashtray and perform a bit of simple surgery to separate the burning plant matter from the rest of the roll.

It’s similar to the technique employed by cigarette smokers: press the tip of the joint against a flat, hard surface.

How To Put Out A Joint And Save It For Later