Biodrying 

®

Sorain

The industrial solution
for advanced WTE plants

Sorain

The easy way to trasform waste

into SRF/RDF or Biofuel

 Biodrying 

®

The purpose of biodrying is to reduce
the moisture content of a waste stream,
or portion of it, to obtain an alternative fuel (SRF/RDF) with higher calorific value,
or biogenic fuel.

What is biodrying
 

 

 

 

 

 

Biodrying is an industrial exothermic process, alternative to conventional drying system,
which uses a small part of the energy contained in the biodegradable matter to heat feedstock
so reducing moisture by extracting generated steam.
 
Very similar to the thermophilic stage
of a bio-stabilization process, biodrying target can be achieved in a short time, from few days up to 2 weeks, depending on input waste.

 

 

 

 

 

Biodrying vs conventional drying

 

 

 

 

 

The main advantage of the biodrying process, applied to waste, is the use of a natural and relatively cheap energy instead of fossil fuels used by conventional sophisticated and expensive drying systems: biodrying is cheaper and environmental friendly.

 

 

 

 

 

Biodrying Sorain® technology

 

 

 

 

 

In order to obtain the best drying, the Biodrying Sorain® technology is fitted with forced aeration of the biomass by centrifugal fans, working
in a negative mode (air suction through the pile).

 

The negative forced aeration mode is by far more efficient than injection mode. Extracted air from the bottom is able to transport greater quantity of steam, than the injected air,
due to its higher exit temperatures.
Being a dynamic process, the incoming feedstock is immediately put in the best conditions for activating the biological process. The result is a really quick start-up.

 

 

 

 

 

Auger turning, besides to optimize air circulation through the pile and moisture extraction, allows  
its perfect homogenization.

Biodrying Sorain
® technology is based on Biomax® reactor, so to obtain the most efficient results among those available on the market.
Biodrying Sorain
® technology is capable to reduce moisture content up to 70% in a short time.

 

 

1.

2.

3.

Compact and completely automatic system

Immediate activation of the process compared
to static systems

Porosity control by material turning
which ensures accelerated drying and uniform SRF/RDF final product

Process air extraction from the bottom to obtain the optimal removal of moisture

Key advantages

4.

5.

6.

Applicable to all types of waste: all types of waste containing moisture and easily biodegradable organic matters are suitable for Biodrying Sorain®: Municipal Solid Waste, biomasses, agricultural waste, paper pulp, etc.

Modular

100% electrically driven

Adaptable to any type of capacity starting
from 20 tons/day (6.000 tpy)


Automatic temperature and moisture control

7.

8.

9.

SRF/RDF production line with Biodrying Sorain®
 
 

 

 

Biodrying Sorain® can be delivered as a stand-alone process or integrated in “turn-key” processing plant, completed with pre and post-treatment phases.

The pre-treatment phase is focused on the preparation of the material and mainly consists of shredding phase followed by the separation of the recyclable materials (plastics, ferrous and non-ferrous materials) and,
if needed, optical separation of items with high chlorine content as PVC.
Such treatment ensures a homogeneous and adequate feedstock to the following biodrying process.

 

 

biosolids/digestate

 

 

dried pellets

The post treatment phase has the purpose to further increase the energy content of the output dried material by means of inert separation, followed by a fine shredding phase.

The result of such post treatment is a non-conventional fuel with a high calorific value suitable for cement kilns, fluidized bed boiler, gasification system, etc.

 

 

sorain.com

biodrying sorain_en

By Simona Malizia

biodrying sorain_en

  • 20