How to Low Stress Train Autoflowers

How to LST autoflowers?

1. Get everything you need

2. Prepare pots

3. Anchoring

4. Watch and wait

5. Repeat process

6. Flowering

1. Get everything you need

You want to start by getting all the supplies you’ll need. Pick up some materials for tying down/onto branches, like plant wire or soft purpose-built plant ties. Avoid using string as this can irritate the plant’s stems. At a push, you can use elastic bands. You’ll also need a stake to keep the plant sturdy. Opt for thin and lightweight stakes like bamboo. Some growers choose to place bamboo poles horizontally across the plant pot for anchoring, too. A small drill also comes in handy for creating holes in the pot to attach your ties to. Lastly, some good quality duct tape is indispensable for fixing snaps or ties.

2. Prepare pots

Your tied down branches need to be attached to your pot. The easiest method of doing this is to drill holes around your container’s rim. You can start off by drilling holes at an even distance around the container so that you have more options when the LST begins. You’ll also want to affix your stake to the plant’s stem here to keep it sturdy. Don’t fill your pot to the top with soil, but leave a few extra centimeters for these holes.

3. Anchoring

Now the fun begins. To anchor the stem you’d like to bend and form, simply affix your tie, gently pull it down and link it with a hole you made in your container. While there are many methods of LST, the idea is to create an even top canopy – so bend your stem and branches in line with one another. There are a number of other techniques here to achieve a flat canopy, like pruning for better light absorption. While there isn’t a rule book on how to shape, it’s always good to start with a mental plan rather than just making it up as you go along. Know the shape you want and put it into practice.

4. Watch and wait

Once you’ve shaped your plant, and it all looks nice and even, wait. Autoflowers grow fast, so you may spot early changes within the same day! Remember, LST is a constant process that you’ll have to keep an eye on. You don’t just anchor your branches and leave it to grow, you’ll have to guide your plant over time to fill an even canopy. If you notice your autoflower stretching, provide more light for longer periods of time. Giving your autoflower greater access to light will promote branch formation rather than single stem stretching.

Want to know what is vegetative state of cannabis is? and learn about panama red seeds and try autoflower seed, black jack auto.

5. Repeat process

LST requires constant revision and upkeep to maintain an even canopy. Return to your plant at least every 24 hours and tie and anchor any new branch formations. You can repeat this process as long as your vegetative plant is growing, although you want to ease up when you spot signs of pre-flowering.

6. Flowering

Once your autoflower starts flowering, it will begin to mature very quickly. At this point, you don’t want to adjust your branches and stems any further because you risk inflicting permanent damage. However, you can still continue trimming and pruning the branches below that have no chance of getting light. This will re-direct energy towards the exposed branches for greater yields. You can also begin to remove foliage below for better ventilation and ensure that your resinous buds are getting all the nutrients they require. Step back and admire your spider-like handiwork as your autoflower meets its full potential.